List Mil Specs - DSCC
Skip past navigationLink: To the Defense Logistics Agency (DLA) Defense Supply Center Columbus: taking the lead in land and maritime support. Howitzer, missile, and aircraft carrier.
Red and blue horizontal stripes.
MIL-STD-202
Document Standardization Division | Document Index | Standard Items


Test Method Standard, Electronic and Electrical Component Parts (with Notice 1 Incorporated)
FSC 59GP

This standard establishes uniform methods for testing electronic and electrical component parts, including basic environmental tests to determine resistance to deleterious effects of natural elements and conditions surrounding military operations, and physical and electrical tests. For the purpose of this standard, the term "component parts" includes such items as capacitors, resistors, switches, relays, transformers, and jacks. This standard is intended to apply only to small parts such as transformers and inductors, weighing up to 300 pounds or having a root mean square test voltage up to 50,000 volts unless otherwise specifically invoked. The test methods described herein have been prepared to serve several purposes:
  • To specifiy suitable conditions obtainable in the laboratory which give test results equivalent to the actual service conditions existing in the field, and to obtain reproducibility of the results of tests. The tests described herein are not to be interpreted as an exact and conclusive representation of actual service operation in any one geographic location, since it is known that the only true test for operation in a specific location is an actual service test at that point.
  • To describe in one standard (1) all of the test methods of a similar character which appeared in the various joint or single-service electronic and electrical component parts specifications, (2) those test methods which are feasible for use in several specifications, and (3), the recognized extreme environments, particularly temperatures, barometric pressures, etc., at which component parts will be tested under some of the presently standardized testing procedures. By so consolidating, these methods may be kept uniform and thus result in conservation of equipment, man-hours, and testing facilities. In achieving these objectives, it is necessary to make each of the general tests adaptable to a broad range of electronic and electrical component parts.
  • The test methods described herein for environmental, physical, and electrical tests shall also apply, when applicable, to parts not covered by an approved military specification, military sheet form standard, specification sheet, or drawing.
Note: This copy of MIL-STD-202 has also been broken down into four sections (Introduction, and Sections 100, 200, and 300) and individual test methods to make downloading easier.


Points of contact:
Capacitor/Filter Group
Phone: 614-692-0562, 0563
Email: CapacitorFilter@dla.mil
Document Downloads
MIL-STD-202Acrobat file
Test Method Standard, Electronic and Electrical Component Parts (with Notice 1 Incorporated)
Revision: G, Dated: 8 February 2002
File name: std202.pdf, File size: 1240 kb
MIL-STD-202G Introduction Section (with Notice 1 Incorporated)Acrobat file
Introduction Pages to MIL-STD-202 Including Foreword, Table of Contents, and Scope.
Dated: 8 February 2002
File name: std202intro.pdf, File size: 32 kb
MIL-STD-202G Section 100 (with Notice 1 Incorporated)Acrobat file
Section 100 of MIL-STD-202G.
Dated: 8 February 2002
File name: std202section100.pdf, File size: 311 kb
MIL-STD-202G Section 200 (with Notice 1 Incorporated)Acrobat file
Section 200 of MIL-STD-202G.
Dated: 8 February 2002
File name: std202section200.pdf, File size: 692 kb
MIL-STD-202G Section 300 (with Notice 1 Incorporated)Acrobat file
Section 300 of MIL-STD-202G.
Dated: 8 February 2002
File name: std202section300.pdf, File size: 175 kb
MIL-STD-202 Test Method 101Acrobat file
Salt Atmosphere (Corrosion) (Formerly Salt Spray (Corrosion))
Dated: 8 February 2002
File name: std202mthd101.pdf, File size: 34 kb
MIL-STD-202 Test Method 102Acrobat file
Temperature Cycling (Canceled)
Dated: 8 February 2002
File name: std202mthd102.pdf, File size: 7 kb
MIL-STD-202 Test Method 103Acrobat file
Humidity (Steady State)
Dated: 8 February 2002
File name: std202mthd103.pdf, File size: 12 kb
MIL-STD-202 Test Method 104Acrobat file
Immersion
Dated: 8 February 2002
File name: std202mthd104.pdf, File size: 13 kb
MIL-STD-202 Test Method 105Acrobat file
Barometric Pressure (Reduced)
Dated: 8 February 2002
File name: std202mthd105.pdf, File size: 12 kb
MIL-STD-202 Test Method 106Acrobat file
Moisture Resistance
Dated: 8 February 2002
File name: std202mthd106.pdf, File size: 49 kb
MIL-STD-202 Test Method 107Acrobat file
Thermal Shock
Dated: 8 February 2002
File name: std202mthd107.pdf, File size: 27 kb
MIL-STD-202 Test Method 108Acrobat file
Life (at Elevated Ambient Temperature)
Dated: 8 February 2002
File name: std202mthd108.pdf, File size: 15 kb
MIL-STD-202 Test Method 109Acrobat file
Explosion
Dated: 8 February 2002
File name: std202mthd109.pdf, File size: 34 kb
MIL-STD-202 Test Method 110Acrobat file
Sand and Dust
Dated: 8 February 2002
File name: std202mthd110.pdf, File size: 15 kb
MIL-STD-202 Test Method 111Acrobat file
Flammability (External Flame)
Dated: 8 February 2002
File name: std202mthd111.pdf, File size: 44 kb
MIL-STD-202 Test Method 112Acrobat file
Seal
Dated: 8 February 2002
File name: std202mthd112.pdf, File size: 81 kb
MIL-STD-202 Test Method 201Acrobat file
Vibration
Dated: 8 February 2002
File name: std202mthd201.pdf, File size: 9 kb
MIL-STD-202 Test Method 202Acrobat file
Shock (Specimens Weighing Not More Than 4 Pounds) (Canceled)
Dated: 8 February 2002
File name: std202mthd202.pdf, File size: 5 kb
MIL-STD-202 Test Method 203Acrobat file
Random Drop
Dated: 8 February 2002
File name: std202mthd203.pdf, File size: 80 kb
MIL-STD-202 Test Method 204Acrobat file
Vibration, High Frequency
Dated: 8 February 2002
File name: std202mthd204.pdf, File size: 52 kb
MIL-STD-202 Test Method 205Acrobat file
Shock, Medium Impact (Canceled)
Dated: 8 February 2002
File name: std202mthd205.pdf, File size: 5 kb
MIL-STD-202 Test Method 206Acrobat file
Life (Rotational)
Dated: 8 February 2002
File name: std202mthd206.pdf, File size: 24 kb
MIL-STD-202 Test Method 207Acrobat file
High-Impact Shock
Dated: 8 February 2002
File name: std202mthd207.pdf, File size: 228 kb
MIL-STD-202 Test Method 208Acrobat file
Solderability
Dated: 8 February 2002
File name: std202mthd208.pdf, File size: 31 kb
MIL-STD-202 Test Method 209Acrobat file
Radiographic Inspection
Dated: 8 February 2002
File name: std202mthd209.pdf, File size: 14 kb
MIL-STD-202 Test Method 210Acrobat file
Resistance to Soldering Heat
Dated: 8 February 2002
File name: std202mthd210.pdf, File size: 49 kb
MIL-STD-202 Test Method 211Acrobat file
Terminal Strength
Dated: 8 February 2002
File name: std202mthd211.pdf, File size: 61 kb
MIL-STD-202 Test Method 212Acrobat file
Acceleration
Dated: 8 February 2002
File name: std202mthd212.pdf, File size: 11 kb
MIL-STD-202 Test Method 213Acrobat file
Shock (Specified Pulse)
Dated: 8 February 2002
File name: std202mthd213.pdf, File size: 61 kb
MIL-STD-202 Test Method 214Acrobat file
Random Vibration
Dated: 8 February 2002
File name: std202mthd214.pdf, File size: 65 kb
MIL-STD-202 Test Method 215Acrobat file
Resistance to Solvents
Dated: 8 February 2002
File name: std202mthd215.pdf, File size: 27 kb
MIL-STD-202 Test Method 216Acrobat file
Resistance to Solder Wave Heat
Dated: 8 February 2002
File name: std202mthd216.pdf, File size: 5 kb
MIL-STD-202 Test Method 217Acrobat file
Particle Impact Noise Detection (PIND)
Dated: 8 February 2002
File name: std202mthd217.pdf, File size: 39 kb
MIL-STD-202 Test Method 301Acrobat file
Dielectric Withstanding Voltage
Dated: 8 February 2002
File name: std202mthd301.pdf, File size: 18 kb
MIL-STD-202 Test Method 302Acrobat file
Insulation Resistance
Dated: 8 February 2002
File name: std202mthd302.pdf, File size: 13 kb
MIL-STD-202 Test Method 303Acrobat file
DC Resistance
Dated: 8 February 2002
File name: std202mthd303.pdf, File size: 7 kb
MIL-STD-202 Test Method 304Acrobat file
Resistance-Temperature Characteristic
Dated: 8 February 2002
File name: std202mthd304.pdf, File size: 11 kb
MIL-STD-202 Test Method 305Acrobat file
Capacitance
Dated: 8 February 2002
File name: std202mthd305.pdf, File size: 7 kb
MIL-STD-202 Test Method 306Acrobat file
Quality Factor (Q)
Dated: 8 February 2002
File name: std202mthd306.pdf, File size: 6 kb
MIL-STD-202 Test Method 307Acrobat file
Contact Resistance
Dated: 8 February 2002
File name: std202mthd307.pdf, File size: 10 kb
MIL-STD-202 Test Method 308Acrobat file
Current-Noise Test for Fixed Resistors
Dated: 8 February 2002
File name: std202mthd308.pdf, File size: 52 kb
MIL-STD-202 Test Method 309Acrobat file
Voltage Coefficient of Resistance Determination Procedure
Dated: 8 February 2002
File name: std202mthd309.pdf, File size: 8 kb
MIL-STD-202 Test Method 310Acrobat file
Contact-Chatter Monitoring
Dated: 8 February 2002
File name: std202mthd310.pdf, File size: 60 kb
MIL-STD-202 Test Method 311Acrobat file
Life, Low Level Switching
Dated: 8 February 2002
File name: std202mthd311.pdf, File size: 13 kb
MIL-STD-202 Test Method 312Acrobat file
Intermediate Current Switching
Dated: 8 February 2002
File name: std202mthd312.pdf, File size: 15 kb
Related Items
Search for other documents with FSC 59GP


Back to index.Document Index
New search.Document Search

Comments or questions: VaWebTeam@dla.milSend email
Site Help Privacy & Security     External Links     Accessibility     Viewers
Date of Last Update: 15 May 2003